Your Solution to Wheel Safety

Wheel Nut Indicators Standard Series (WNIS)

Fluoro yellow flat ring style loose wheel nut indicator. Made with Polyethylene and a melting point of 120℃/ 248℉. Commonly used on wheels with steel rims. These easy-to-install ring-style indicators are highly visible, indicate overheating, and are a simple way to detect loose wheel nuts. Demonstrate safety vigilance to the community and relevant local authorities with our range of wheel nut indicators.

Available Sizes: 17mm, 19mm, 21mm, 22mm, 27mm, 32mm, 33mm, 38mm, 41mm

The Wheel Nut Indicator Standard Series (WNIS) includes: WNIS17, WNIS19, WNIS21, WNIS22, WNIS27, WNIS32, WNIS33, WNIS38, WNIS41

Bulk purchase discounts are available on loose wheel nut indicators for fleet managers and Light Vehicle hire companies enquiries@wheelnutindicators.com.au.

For Vehicle Compliance and Safety Requirements

Wheel Nut Indicators Dust Cap Long Reach Series (WNIDCL)

The WNIDCL series of indicators is a fluoro yellow wheel nut indicator with a dust cap that provides additional corrosion protection for bolts and nuts. Available in 17mm, 19mm, 21mm and 22mm sizes and designed in a long reach (37mm) or extended reach (56mm) for wheels with trims or step rings. Made from impact-resistant polyethylene with a melting point of 120℃/ 248℉ our dust cap indicators provide an easy way to detect loose wheel nuts and overheating issues.

Available Sizes: 17mm, 19mm, 21mm, 22mm

The Wheel Nut Indicators Dust Cap Long Reach Series (WNIDCL) includes: WNIDCL17, WNIDCL19, WNIDCL21, WNIDCL22, WNIDCL19EXT, WNIDCL21EXT.

Highly Visible Wheel Nut Retainer

Wheel Nut Retainer Double Link Series (WNRDL)

Our double link retainer is made up of 2 linked rings that fit to adjacent wheel nuts and hold the nuts in place. They are fluoro yellow making them highly visible, even in low light. They provide a dual-purpose loose wheel nut indicator as well as a retainer feature. If a wheel nut does become loose the link joining the 2 rings will distort to identify the pair of nuts that need tightening. These retainers are made from copolymer polyethylene with a melting point of 120 degrees Celsius to indicate any overheating problems resulting from braking drag or bearing failure.

The Wheel Nut Retainer Double Link is available in packs of 20 pieces in 32mm, 33mm and 41mm ring sizes.
WNR-DL-32-X20, WNR-DL-33-X20, WNR-DL-41-X20

Bulk pricing is available for quantities of 2 units or more. For large volumes of Wheel Nut Retainers for fleet managers please get in touch with us with your requirements enquiries@wheelnutindicators.com.au

6-Stud Loose Wheel Nut Locker

WNL Series Available Sizes WNL06-19E, WNL06-21E

Our Wheel Nut Locks are specially designed for 6-stud wheels with trims and step rings. The 6 long extended reach barrels are linked together as a single piece and fit as a unit onto each wheel. They are conveniently available in packs of 4 in sizes to fit 19mm and 21mm wheel nuts. They are manufactured to the highest quality using copolymer polyethylene and are impact resistant with a melting point of 120℃ (248℉).

As a safety device, this loose wheel nut indicator and retainer creates a resistance between the wheel nuts to minimize movement and prevent them loosening. The fluoro orange colour makes them highly visible for quick safety checks.

Simple to install - push on for a firm fit. Ease off to retorque wheel nuts then reuse.

Show other road users that you take vehicle saftey seriously and install our fluoro orange 6-stud Wheel Nut Lockers on your vehicle.